Who is RIIFT
Integrated foil assist from riders who wanted something better
RIIFT was started by John and Al, two foilers who wanted a powered setup that felt balanced and intuitive and didn't make them give up the feel of a great foil board. They couldn't find one, so they built it. Today the RIIFT crew includes some of the most respected names in foiling, like Kane De Wilde, downwind racer and shaper Jarrod Snow, and Nathan Van Vuuren of SPG Foils.
Their idea is simple: powered or unpowered, the board should look and ride the same. RIIFT calls it the world's most balanced foil assist, and after one look at where the weight sits, it's easy to see why.

How the RIIFT system works
Recess integrated foil assist in three simple parts
Most foil drives hang a battery on the mast or mount a box on the deck. RIIFT puts the power inside the board, so the weight sits between your stance and the board keeps its shape. That makes it a real foil drive alternative for riders who care about feel.
1. RIIFT Tracks
A 100% carbon recess built into the board by your shaper. It keeps the outline, rocker, rails and bottom contours of the original shape.
2. Power module clicks in flush
The 2P, 3P or 4P module clicks into the tracks to form a flush deck, sitting right above the front wing's center of lift.
3. Propulsion pack on your mast
Strap the universal 49 mm motor pod to your carbon mast, power on the remote, and go. No drilling and no trench in the board.
RIIFT PowerPack highlights
Power you forget is there
Over 30 kg of thrust
A 49 mm, 2500 W motor with 40% less frontal area than a typical 63 mm pod, so touchdowns barely register.
Sealed IP68 power
A self-contained, waterproof power module tested to be fire and explosion resistant.
Pitch and roll cut-off
An optional sensor that cuts power to the prop if the board flips or rolls past the angle you set.
Throttle limiting
Dial the power down for first flights, lessons or kids having a go.
RIIFT 2P vs 3P vs 4P
Pick your RIIFT power module
Every PowerPack comes with the same propulsion pack, remote and hard case. The power module is the only choice you make, and all three fit boards with RIIFT Large Tracks.
*RIIFT's real world testing with an 80 kg advanced rider in flat water on an 800 cm² high aspect foil, in a single run. Your time will change with rider weight, experience, conditions and gear. Installed weight includes the power module and propulsion unit.
Where RIIFT shines
One RIIFT board for prone, downwind, wing foil assist and more
Prone and surf foiling
Get into waves earlier, link more of them, and paddle back out fresh. With the 2P the board stays light and lively.
Downwind
Use a short burst to get up on the first bump, then turn it off and ride the swell. The weight between your feet keeps the board solid in rough water.
Wing and parawing foil assist
Pop up in light wind or lulls, then fly the wing or parawing as usual. One board can be an assist board, a prone board and a parawing board.
Flat water and pumping
The 4P is a great tow foil alternative for long flat water sessions, schools and clubs, and you can still pump it thanks to where it sits in the board.
Watch
See how the RIIFT foil assist sets up
Setting up your RIIFT for the first time
John on RIIFT's guiding principles: minimise drag, tools and compromise

Board compatibility
Made for RIIFT-enabled foil boards
The RIIFT PowerPack only works with RIIFT-enabled boards, which have RIIFT Tracks built in by the shaper. It will not bolt onto a standard foil board.
- Large Tracks: fit the 2P, 3P and 4P power modules.
- Small Tracks: fit the 2P power module only.
RIIFT's growing shaper network includes KT, Axis, Sunova, Appletree, SPG, Kalama, Amundson, Jarrod Snow, Omen, Stinger, 270, Bold Foilboards, Amos, Majek and Swift Foiling. Not sure which board is right for you? Call us or stop by the shop and we will help you sort it out.
What's in the box
Everything you need in one RIIFT PowerPack
Hard case: A tough case that doubles as the shipping box, with removable foam inserts.
Power module: 2P, 3P or 4P battery unit, 10A battery charger and regional AC cable.
Propulsion pack: Universal mast pod, 49 mm 2500 W motor, 3 blade prop hub with hardware, 3 hard anodized aluminum foil assist blades and a 50 cm cable set up for foil assist.
Controller pack: Remote control, high visibility floating wrist leash, Special Edition Kāohi wrist leash and USB wireless charging pad.
Tools and extras: 2.5 mm and 3.0 mm hex keys, T30 / T40 Torx tool, 100 g dielectric grease and a neoprene prop guard.

Shop the RIIFT lineup
Complete your RIIFT setup
Start with the PowerPack, add a second Power Module for longer or lighter sessions, and have your shaper build RIIFT Tracks into your next board. Everything is on preorder and ships in Jan 2027.
RIIFT PowerPack
From $4,999
The complete foil assist kit: power module, propulsion pack, remote and hard case. Preorder, ships in Jan 2027.
RIIFT Power Module
From $2,999
A spare or second IP68 battery in 2P, 3P or 4P that clicks into the same board. Battery, 10A charger and AC cable. Preorder, ships in Jan 2027.
RIIFT Tracks
$449
The carbon recess your shaper builds into a new board. Small fits the 2P, Large fits the 2P, 3P and 4P. Comes with a RIIFT Blank. Preorder, ships in Jan 2027.
RIIFT FAQ
RIIFT foil assist questions, answered
Will the RIIFT PowerPack fit my current foil board?
Only if it is a RIIFT-enabled board. The power module clicks into RIIFT Tracks that a shaper builds into the board, so a standard foil board will not take it. Boards with Large Tracks fit the 2P, 3P and 4P modules. Boards with Small Tracks fit the 2P only.
Will the motor fit my foil mast?
Most likely. The RIIFT universal mast pod straps onto virtually any carbon mast in seconds, and the complete pod assembly weighs under 990 g.
Which power module should I pick?
The 2P (519 Wh) is the lightest and best for lighter riders and people already comfortable prone foiling and downwinding. The 3P (778 Wh) is RIIFT's all round pick. The 4P (1,037 Wh) gives the most time on the water and suits heavier riders, long flat water sessions, schools and clubs, and it can still be pumped.
Can I ride the board without the motor?
Yes. Each RIIFT-enabled board comes with a lightweight foam RIIFT Blank that fills the recess, so you get a flush hull for unpowered foiling. Pop it out and click in the power module when you want the assist.
How long does it take to charge?
With the included 10A charger, RIIFT quotes 58 min to 80% for the 2P, 86 min for the 3P and 115 min for the 4P. Charge times vary with conditions and use.
Is it safe and waterproof?
The power module is a sealed, self-contained IP68 unit that RIIFT tested to be fire and explosion resistant. There is an optional pitch and roll sensor that cuts power to the prop if the board flips, plus an adjustable throttle limit. RIIFT covers the power module for 12 months and wearing parts, including the motor, for six months.
When will my PowerPack ship?
RIIFT is shipping the first PowerPacks in January 2027. Preorder with us now to hold your spot, and we will keep you posted as soon as yours is on the way.









