Lift Foils 33" LCS 55 Carbon Ultra-High Mount Propulsion for LIFTX
$3,071.00 USD
By LIFT
The 33" LCS Carbon 55 Ultra-High Propulsion places the motor 7 inches below the board, the highest motor position in Lift's line. Once you're on foil and riding the energy of the water, the motor clears the surface and drag drops to the mast and wing. The 33 inch carbon mast adds ride height over the 32 inch mounts, more room to carve, turn, and pump. It clicks into any LIFTX, LIFT5, or LIFT5 F board through the Lift Connect System and ships with the LCS Folding Glide Propeller installed.
HIGH vs. LOW MOUNT
- High mount means earlier lift and no motor
drag. -
Low mount is perfect for downwind
sprints and learning.
| Mast Length | 33" (84 cm) |
| Mast Material | Carbon Fiber |
| Weight (no propeller installed) | 9.0 lbs. (4 kg) |
| Motor Position (rocker to mid-motor) | 7" (17.8 cm) |
| Motor Diameter | 55mm |
| Maximum Sustained Cruising Power | 3800W (5.1 hp) |
| Maximum Sustained Cruising Thrust | Under 95 lbs |
| Included Propeller | LCS Folding Glide Propeller |
| Board Compatibility | LIFT5, LIFT5 F, LIFTX |
⚠️ IMPORTANT: It is critical all eFoil equipment is turned off and the battery is disconnected before working with or around the motor or propellers.
- Avoid contact with the spinning propeller, as it can cause severe injury or death.
- Keep your fingers, toes, and body parts clear of the propeller at all times.
- Do not handle the propeller while the battery is installed in the board.
- Do not handle your propeller in the water.